1 d a t a s h e e t : c l d - c t 1 1 2 0 . 0 0 0 cree ? p4 led cp41t-rds/ads (40 degrees) cp41t-rfs/afs (70 degrees) cp41t-rhs/ahs (100 degrees) data sheet this revolutionary package design allows the lighting designer to reduce the number of leds required and provide a more uniform and unique illuminated appearance than with other led solutions. this is possible through the effcient optical package design and high current capabilities. the low- profle package can be easily coupled with refectors or lenses to effciently distribute light and provide the desired lit appearance. this product family employs green and blue led materials, which allow designers to match the color of many lighting applications like vehicle signal lamps and amusement lighting. features ? size (mm): 7.6 x 7.6 ? color and typical dominant wavelength (nm): ? red (628) ? amber (591) ? luminous flux (mlm) ? cp41t-rds (2750-6600) ? cp41t-rfs/rhs (3300-6600) ? cp41t-ads/afs/ahs (2200-6600) ? lead-free ? rohs-compliant applications ? channel letter ? amusement subject to change without notice. www.cree.com/ledlamps
2 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit red/amber forward current i f 70 note1 ma peak forward current note2 i fp 200 ma reverse voltage v r 5 v power dissipation p d 220 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c lead soldering temperature t sol max. 260c for 5 sec. max. (3 mm from the base of the epoxy bulb) notes: ? a heat sink is recommended if the device is operated at ambient temperatures higher than 25c. ? pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics color symbol condition unit minimum typical maximum forward voltage red/amber v f i f = 70 ma v 2.6 3.4 reverse current red/amber i r v r = 5 v a 100 dominant wavelength red d i f = 70 ma nm 620 628 637 amber d i f = 70 ma nm 584 591 599 luminous flux red cp41t-rds (40 degree) v i f = 70 ma mlm 2750 4000 cp41t-rfs (70 degree) v i f = 70 ma mlm 3300 4500 cp41t-rhs (100 degree) v i f = 70 ma mlm 3300 4000 amber cp41t-ads/afs/ahs v i f = 70 ma mlm 2200 3200 50% power angle cp41t-rds/ads 2? i f = 70 ma deg 40 cp41t-rfs/afs 2? i f = 70 ma deg 70 cp41t-rhs/ahs 2? i f = 70 ma deg 100
3 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. flux bin limit (i f = 70 ma) tolerance of measurement of luminous fux is 15%. color bin limit (i f = 70 ma) vf bin limit (i f = 70 ma) tolerance of measurement of dominant wavelength is 1 nm. red bin code min. (v) max. (v) 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 28 3.0 3.2 amber bin code min. (v) max. (v) 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 28 3.0 3.2 29 3.2 3.4 tolerance of measurement of vf is 0.05 v. amber bin code min. (nm) max. (nm) a2 584 587 a3 587 590 a4 590 593 a5 593 596 a6 596 599 red bin code min. (nm) max. (nm) re 620 637 red amber cp41t-rds (40 degree) bin code min. (mlm) max. (mlm) h0 2750 3300 j0 3300 3850 k0 3850 4400 l0 4400 5500 m0 5500 6600 cp41t-rfs/rhs (70/100 degree) bin code min. (mlm) max. (mlm) j0 3300 3850 k0 3850 4400 l0 4400 5500 m0 5500 6600 cp41t-ads/afs/ahs (40/70/100 degree) bin code min. (mlm) max. (mlm) g0 2200 2750 h0 2750 3300 j0 3300 3850 k0 3850 4400 l0 4400 5500 m0 5500 6600
4 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. order code table* red color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp41t-rds-ch0m0ee4 40 2750 6600 re 620 re 637 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp41t-rfs-cj0m0ee4 70 3300 6600 re 620 re 637 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp41t-rhs-cj0m0ee4 100 3300 6600 re 620 re 637 amber color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber CP41T-ADS-CG0L0264 40 2200 5500 a2 584 a6 599 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber cp41t-afs-cg0l0264 70 2200 5500 a2 584 a6 599 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber cp41t-ahs-cg0m0264 100 2200 6600 a2 584 a6 599 notes: ? the above kit numbers represent order codes that include multiple fux-bin and color-bin codes. only one fux-bin code and one color-bin code will be shipped on each tube. single fux-bin codes and single color-bin codes will not be orderable. ? please refer to the cree led lamp reliability test standards document for reliability test conditions. ? please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
5 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. graphs f i g . 2 r e l a t i v e l u m i n o u s f l u x v s. i f (m a) f o r w a rd curr e nt i f ( m a) v f( v) f o rw a rd v o l t a g e. f ig .1 f o r wa rd curre nt v s. if ( m a) 0 .0 0 .5 2 .0 1 .0 1 .5 2 .5 60 20 40 100 80 0 0 60 20 40 1 00 80 40 20 80 60 1 00 0 t a ( c) r ed a m b er f i g . 5 r ed & a m be r m ax i m u m f o r w a rd d cc u rr e n t v s a m b i e n t t e m pe r a t ur e ( t j m a x= 1 2 0 c) vs . r e v e r se v o l t a g e. f i g . 3 r ed & a m b e r r ev e r s e curr e nt f i g. 6 f a r f i e l d p a t t e rn - 90 - 60 - 30 0 0 0 0 .5 1 .0 f i g. 4 r e l a t i v e l u m i n o u s i n t e n s i t y vs. w ave l e n g t h. 30 60 90 5 0 % p o w e r a ng l e : 40 2 .6 1 .8 2 .2 2 .0 2 .4 2 .8 20 .0 4 0 .0 80 .0 60 .0 1 0 0 .0 0 .0 r ed a m ber a n g le - 10 - 50 v r( v) - 30 - 40 - 20 - 40 i r ( u a) - 50 - 30 - 20 - 10 0 - 60 w l ( n m) 80% 20% 40% 60% 0% 1 0 0% 700 3 00 500 4 00 600 800 9 00 r ed a m ber ( r e l a t i ve l u m i n o u s f l u x) ( r e l a t i ve l u m i n o u s i n t e n s i t y) ( r e l a t i v e l u m i n o u s i n t e n s i t y) c p 4 1 t - a d s / rds the above data are collected from statistical fgures which do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice. fig . 7 f ar f i el d pat t e rn - 90 - 60 - 30 0 0 0 0 .5 1 .0 30 60 90 5 0% po we r an g le : 70 a ng le fi g . 8 f ar f i el d pat t e rn - 90 - 60 - 30 0 0 0 0 .5 1 .0 30 60 90 5 0% po w e r an g le : 100 a ng le (r el at i ve lu mi n o u s i n t en si t y) (r el at i ve lu mi n o u s i n t en si t y) c p 4 1 t -af s/ r fs c p4 1 t -ah s/ r hs
6 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. mechanical dimensions all dimensions are in mm. tolerance is 0.25 mm unless otherwise noted. an epoxy meniscus may extend about 1.5 mm down the leads. burr around bottom of epoxy may be 0.5 mm max. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. cp41t-rds/ads: ? ? cp41t-rfs/afs/rhs/ahs:
7 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner:
8 cld-ct1120.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. package features: ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shock during transportation. ? the boxes are not water resistant, and they must be kept away from water and moisture. ? the tube pack type of packaging. ? max 60 pcs per tube. h u e xx ax xxx xxx xx x x c o l o r l e d l a mp j o w axxxxx - xx - xxx l xxxx x xxx - xxx l ot t ype xxx xxx vf xx iv x r a nk q t y p cs r r
|
